Change Your Ip In Less Then a Minute

This is slightly lenghty process for a newbie.
But if you stick on to this article you can do it perfectly

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

Change Your Processor to Quad Core

This trick is really fun one since you can make your friends fool.It may also not recommended as this may cause windows to provide falsified information to it self and other applications, which would cause system stability issue and may slow down the system….

To Change the Processor Name shown in the System properties Dialog Box
Just Follow these Steps

Under Windows XP, Click Start, then RUN Command, “regedit“… (Without the quote symbols)… Now please navigate your self to this Registry location,

>HKEY_LOCAL_MACHINE > HARDWARE > DESCRIPTION > SYSTEM > CENTRAL PROCESSOR > GO TO 0

Now please double click, on the key PROCESSORNAMESTRING . Change the value as you like.Using this you can change your Processor info even from Pentium III to Quad Core but only for displaying in properties only